网站地图 欢迎来到山东汇德宝仓储设备制造有限公司网站! 加入收藏 | 设为首页 | 联系我们
青岛货架厂
公司新闻/ Company news

当前位置:首页 > 新闻资讯 > 公司新闻

三方面区分角钢货架与轻量型货架

发布人:admin  发布时间:2018-11-30  浏览次数:1164

一、货架的规格:角钢货架的常规尺寸有:1200*400/500/600*2000,可定制。 轻型货架的常规尺寸有1200/1500*500*2000,亦可定制Shelf specifications: conventional size steel shelf are: 1200*400/500/600*2000, can be customized. Light shelves of conventional size 1200/1500*500*2000, can also be customized.

二、货架的组装: 角钢货架一般是通过螺丝和三角片组装,而轻型货架采用接插式结构,蝴蝶空设计,更加便捷Shelf: shelf assembly is generally through screws and triangular plate assembly, and the light shelf use of plug-in structure, butterfly design, more convenient.

三、货架的承受力: 40X40X1.5的角钢货架的承受力,承重大概80kg左右。轻型货架一般常规规格的,承重有100kg到150KgShelf tolerance: shelf 40X40X1.5 bearing capacity, about 80kg. Light shelves General specifications, bearing 100kg to 150Kg.

  轻量型货架:轻型冲孔货架是一种通用性很强的结构系统,可广泛应用于组装轻型料架、工作台、工具车、悬挂系统、安全护网及支撑骨架。冲孔角钢的长度可按刻度快捷切割、用螺丝任意组装、修正并重新安装,这样它既可满足经周密计划的使用,又可满足紧急使用的需要。 备注: 角钢俗称角铁、是两边互相垂直成角形的长条钢材。有等边角钢和不等边角钢之分。等边角钢的两个边宽相等。其规格以边宽×边宽×边厚的毫米数表示。如“∠30×30×3”,即表示边宽为 30毫米、边厚为3毫米的等边角钢。也可用型号表示,型号是边宽的厘米数,如∠3#。型号不表示同一型号中不同边厚的尺寸,因而在合同等单据上将角钢的边宽、边厚尺寸填写齐全,避免单独用型号表示。热轧等边角钢的规格为2#-20#Lightweight rack: light punching rack is a very common structure system, can be widely used in the assembly of light material rack, workbench, tool vehicle, suspension system, safety net and support frame. Punching angle length scale can be quickly cut, any assembly with a screwdriver, correction and re install, so that it can meet the planned to use, and can satisfy the need for emergency use. Note: the angle called angle, the steel strip is perpendicular to each other on both sides into the corner. There are equilateral angle steel and unequal angle points. An equal angle two edge width equal. The specification is expressed as a number of millimeters in width, width, width and thickness. Such as "/ 30 x 30 x 3", that is 30 mm width equal angle, edge thickness of 3 mm. Also available models that model is the number of centimeters wide, such as angle 3#. Models do not represent the same type of different edge thickness dimensions, and thus in the contract and other documents will be the angle edge width, edge thick size fill in complete, avoid separately represented by models. The specifications for 2#-20# hot rolled equilateral angle steel.

本文来自于山东汇德宝仓储设备制造有限公司,专业生产各种货架,更多信息请访问http://www.sdhdbcc.com/,原创文章,知识产权,转载请保留网址,山东汇德宝仓储设备制造有限公司是专业生产轻型货架,中型货架,重型货架,钢托盘货架,汽车货架,仓库货架,模具货架,仓储货架,立体货架,通廊式货架(贯通式货架,驶入式货架),横梁式仓储货架,重力式仓储货架,悬臂式仓储货架,流利式仓储货架厂家!主要有山东货架厂,济南货架厂,菏泽货架厂,泰安货架厂,淄博货架厂


版权所有:山东汇德宝仓储设备制造有限公司  销售地址:山东省济南市北园大街26号全福立交桥西行300米路南

生产地址:山东省济南市历城区荷花路街道霍家流一村30号  电话:0531-88110651  传真:0531-88902004  网址:www.sdhdbcc.com

备案号:鲁ICP备16042959号  流量统计:  山东汇德宝集团技术支持

在线客服
热线电话
潍坊货架厂
济南仓储货架
微信扫一扫