网站地图 欢迎来到山东汇德宝仓储设备制造有限公司网站! 加入收藏 | 设为首页 | 联系我们
青岛货架厂
公司新闻/ Company news

当前位置:首页 > 新闻资讯 > 公司新闻

隔板货架的简单概述

发布人:admin  发布时间:2018-11-30  浏览次数:1208

1、由立柱、横梁、搁板组成。组装、拆卸简便(仅需要橡皮锤即可操作)

1, from the post, a crossbeam and shelf. Easy to assemble and disassemble (only need a rubber hammer to operate)

2、立柱一般采用C型钢冲方孔或蝴蝶孔制成,孔举例以50mm距离沿直线排列,立柱孔用来挂接横梁。采用“先自动冲孔后冷弯成型”的生产技术的立柱,可以避免立柱应力集中,横撑与斜撑将两根立柱组装成货架的立柱片

2, the column is generally made of C steel punch square hole or butterfly hole, hole for example with 50mm distance along a straight line, the column hole used to hang the cross beam. The column of the production technology of the production technique of the first automatic punching and the cold bending forming process can avoid the stress concentration of the column, and the two upright posts are assembled into the upright post piece of the shelf.

3、横梁常用P型管材,俗称“阶梯梁”,阶梯的高度与层板的高度相匹配

3, beam commonly used P type tube, commonly known as "ladder beam", the height of the ladder and the height of the plate match

4、采用冷轧钢板的搁板具有承载能力强、耐磨损、更换简单,维护成本低的特点

4, the cold rolled steel shelf has a strong bearing capacity, abrasion resistance, simple replacement, low cost of maintenance

5、横梁与立柱片挂接组装成框架,后铺设搁板,至此一组完整的货架成型

5, beam and column pieces assembled into a frame mount, and finally the laying shelf, thus forming a complete set of shelves

6、货架各部件焊接加工好成型之后,全部经打磨、酸洗、磷化、烘干、全自动静电喷塑处理等高温固话工艺处理后组装成品

After 6, the shelf parts processing molding after grinding, welding, pickling, phosphating, drying, automatic electrostatic spray processing high temperature fixed process finished assembly

本文由山东汇德宝仓储设备制造有限公司(山东货架厂,济南货架厂,淄博货架厂,泰安货架厂,菏泽货架厂)整理提供

济南货架厂.jpg

版权所有:山东汇德宝仓储设备制造有限公司  销售地址:山东省济南市北园大街26号全福立交桥西行300米路南

生产地址:山东省济南市历城区荷花路街道霍家流一村30号  电话:0531-88110651  传真:0531-88902004  网址:www.sdhdbcc.com

备案号:鲁ICP备16042959号  流量统计:  山东汇德宝集团技术支持

在线客服
热线电话
潍坊货架厂
济南仓储货架
微信扫一扫