网站地图 欢迎来到山东汇德宝仓储设备制造有限公司网站! 加入收藏 | 设为首页 | 联系我们
青岛货架厂
公司新闻/ Company news

当前位置:首页 > 新闻资讯 > 公司新闻

重型货架在设计时应注意以下几点

发布人:admin  发布时间:2018-11-30  浏览次数:1367

1、货架总深度设计(即导轨长度)不宜过大,否则不可利用的上下“死角”会较大,影响空间利用,且坡道过长,下滑的可控性会较差,下滑的冲力较大,易引起下滑不畅、阻住,托盘货物的倾翻。

1, the total shelf depth design (i.e. rail length) should not be too large, otherwise not available under the "dead" will greatly influence the use of space, and the ramp is too long, the controllability of the decline will be poor, easy to cause the decline in momentum larger decline, sluggish, block, overturning pallet.

2、货架应设计在中间加设阻尼装置,为使下滑流畅,如坡道较长,为使托盘货物下滑至底端时不致因冲击力过大而倾翻,应在坡道低处设缓冲装置和取货分隔装置,因此设计、制造、安装难度较大,成本较高。

2, shelves should be designed with damping device in the middle, the decline is smooth, as long as the pallet ramp, fell to the bottom is not due to the impact of excessive and tilting, should set the buffer device and pickup device in the lowest position separated ramp, therefore the design, manufacture, installation difficult. High cost.

3、此类货架不宜过高,一般在6米以内,单托货物重量一般在1000KG以内,否则其可靠性和可操作性会降低。

3, such goods shelves should not be too high, generally within 6 meters, the weight of goods within a single shelf is generally less than 1000KG, otherwise its reliability and operability will be reduced.

济南货架厂提醒:由于重型货架是属于存放比较大型、重量巨大的物品,所以在设计的时候一定要注意以上提及到的问题,避免货物倒塌现象发生。

Ji'nan shelf factory reminder: due to heavy goods shelves are relatively large, heavy weight goods, so in the design must pay attention to the above mentioned problems, to avoid the phenomenon of the collapse of goods.

本文由山东汇德宝仓储设备制造有限公司(山东货架厂,济南货架厂,淄博货架厂,泰安货架厂,菏泽货架厂)整理提供

菏泽货架厂.jpg


版权所有:山东汇德宝仓储设备制造有限公司  销售地址:山东省济南市北园大街26号全福立交桥西行300米路南

生产地址:山东省济南市历城区荷花路街道霍家流一村30号  电话:0531-88110651  传真:0531-88902004  网址:www.sdhdbcc.com

备案号:鲁ICP备16042959号  流量统计:  山东汇德宝集团技术支持

在线客服
热线电话
潍坊货架厂
济南仓储货架
微信扫一扫